DIS Digital Conference System
Generally, a command from external application is replied to by the CU. But, reply to a command is
10.1.6
CU 6110 reply to commands
produced only if actions are taken by the CU due to the command.
Example: When a 'mic_on' command results in a microphone being turned on, the CU replies with a 'mic_on' command. On the
other hand, if a 'mic_on' command does not lead to turning on a microphone, the CU does not produce any reply.
There can be several reasons for the CU to reject turning on a microphone:
-The microphone is already turned on
-The microphone is no longer connected to the system.
-Speak list is already full ('max_speakers'), and delegate interrupt is not 'on'.
The CU supports streaming of status. When an External Control issues a 'mic_status' or 'audio_status'
10.1.7
Retrieving system status
command, the CU responds by sending the microphone system status. The same goes for 'audio status'.
Hereby, it is possible for an External Control to synchronize with the CU status.
User Manual CU 6110 rev A.docx
User Manual
54