Shure DCS 6000 User Manual page 64

DIS Digital Conference System
Gain can be set to 0 dB or 10 dB. 0 dB will not add any gain to the line input whereas 10 dB will add 10 dB gain to the
line input.
10.3.2.6 Line output level (A-D)
Adjust the level of line output signal.
line_output_level <output> <level><CR>
<output> Indicates which output is being controlled. Possible values: 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H'. On CU59XX and
CU6105 'A' to 'D' are possible. CU6110 may deliver 'A' to 'H'.
<level> The level of line output ranges from -41 to 0. The value -41 indicates Off, whereas values from -40 to 0
indicates attenuation in dB.
10.3.2.7 Define audio path
This command defines audio connections in the system.
audio_path <path> <on/off><CR>
<path> Indicates which connection is being controlled. Possible values: 'mic_to_speaker', 'mic_to_floor',
'linein_1_to_speaker', 'linein_1_to_lineout_A',
'linein_2_to_floor'.
The 'linein_2_...' values are only possible on CU61XX.
<on/off> Indicates,
speakers/lineoutput_A/floor.
This message is only available on CU61xx
10.3.2.8 Individual Speaker Attenuation
This message indicates the speaker attenuation of a microphone.
mic_speaker_attenuation <seat_number> <Attenuation><CR>
<seat_number> The microphone that has been adjusted
<Attenuation>: The desired speaker attenuation. Possible values: 0 to 7.
0 to 6 will attenuate 0 to 6 dB. 7 is speaker off.
This message is only available on CU61xx
10.3.2.9 Individual Microphone Attenuation
This message indicates the attenuation of a microphone.
mic_attenuation <seat_number> <Attenuation><CR>
<seat_number>: The microphone that has been adjusted.
<Attenuation>: The microphone attenuation. Possible values: 0 to 6 dB, where 0 is the lowest attenuation and 6 is
most attenuation.
10.3.2.10 Audio status complete
This command terminates audio status streaming.
audio_status_done<CR>
'linein_1_to_floor',
whether the audio
User Manual CU 6110 rev A.docx
'linein_2_to_speaker',
is being routed from
User Manual
'linein_2_to_lineout_A',
microphones/lineinput_1 to
64