Print; Print Menu - Seitron CHEMIST 600 BE GREEN Use And Maintenance

13.0 PRINT

13.1 Print Menu

21/03/18
10:00
Print
Report Configuration
Pairing Printer
Header Measurements list
PARAMETER
Enables the Print Menu. A hard copy of the complete combustion analysis can be printed. The
printed values are those shown on the display when the menu is enabled. This menu can be
used for combustion analysis, even when recalled from the memory, for draft, smoke, ambient
gas and for tightness test results.
Report
SEE SECTION 13.2.
The user, by means of this menu, can configure the test report format:
Copies: Allows to set the number of printed copies and layout of the paper print-out. Several
Report: The paper print-out layout selection is only valid for combustion analysis and can be
Configuration
Date/Time: It allows you to define whether or not to print the date and time at which the
SEE SECTION 13.3.
Through this sub menu, the user can access to the association procedure between the
instrument and a Bluetooth printer.
The pairing procedure has to be done only once.
Pairing
SEE SECTION 13.4.
Allows to display the MAC code of the Bluetooth printer associated with the instrument.
If the field is empty perform the pairing procedure.
SEE SECTION 13.5.
Printer
Allows the user to enter, in six lines of 24 characters each the name of the Company or owner of
the device or the information regarding the latter (e.g. address, telephone number), which will be
printed in the header of the analysis report.
Header
SEE SECTION 13.6.
In this submenu the user has the possibility to view the list of measurements that the device
performs. With the interactive keys, the user can add, delete or move a selected measurement.
SEE SECTION 13.7.
Measures list
CONTEXT KEY
copies of the test paper print-out can be printed, choosing among different layouts
according to the information included.
chosen among Complete, Partial and Total. Paper print-outs for draft, smoke, ambient
gas concentration and tightness test only allow a specific layout. Layouts options for
combustion analysis are specified as described in the following:
Full: includes a header with company data as well operator data previously
programmed in the configuration menu, measurements sampled in the combustion
analysis and, when sampled, the draft, smoke and CO ambient gas values.
Partial: only reports the combustion analysis measurement values and information,
without any header, comments or blank lines for operator comments.
Total: prints full print-out of average values with individual test data.
combustion analysis was performed.
Manual: The date and time are not printed in the header of the analysis report . It is
the responsibility of the operator to enter the data manually .
Auto: The date and time are printed in the header of the analysis report.
KEY FUNCTION
Activate the context keys shown on the
display.
Returns to the previous screen.
ESC
FUNCTION
◄
Selects the available parameters.
OK
Enters in the selected parameter setting.
►
Selects the available parameters.
DESCRIPTION
100
K400000000SE 041891 010823