Print Menu - Seitron CHEMIST 400 Use And Maintenance Manual

1

4.12 Print Menu

This menu is used to access the following print and check configurations:
Print report:
Shows the details of the selected ticket type and allows to start printing.
2
Print setup:
Copies: Allows to set the number of printed copies and layout of the ticket.
Model: The ticket layout selection is only valid for combustion analysis and can be chosen among Complete,
Partial and Total. Tickets for draught, smoke, ambient gas concentration and tigthness test only allow
a specific layout. Layouts for combustion analysis are specified as described in the following:
Full:
Partial: only reports the combustion analysis measurement values and informations, without any
3
Total: is arranged with the complete layout of the average analysis followed by the single analysis
Paper feed:
Feeds paper in the printer; this function is most useful when replacing the paper roll in the printer.
Print test:
4
Prints a graphical/alphanumeric test ticket for a complete check of the printer operation.
Printer type:
Selects the printer type: internal or Bluetooth.
When Bluetooth printer is selected a pairing procedure will be needed in order to match the printer to
the instrument. The pairing procedure has to be performed only once.
5
6
7
8
36
includes a header with company data as well operator data previously programmed in the
configuration menu, measurements sampled in the combustion analysis and, when sampled,
the draught, smoke and CO - NO ambient gas values.
header, comments or blank lines for operator comments.
measurements report.
K900000000SE 022628A0 071013