Whisk Attachment; Knife Attachment - Cuisinart CSB-300C Instruction And Recipe Booklet

(See the section on processing food, page 16, for information
about when to use the blunt edge.)
A. A.
REMOVING CHOPPER/BLADE ASSEMBLY
To remove rotate assembly right or left to release from the cup shaft.
WHISK ATTACHMENT ASSEMBLY
Align the motor power handle with the assembled whisk attachment
and push the pieces together until you hear and feel them click
together. It may be helpful to press the release button when
assembling.
Note: Whisk and gearbox are detachable from one another.

KNIFE ATTACHMENT

1. Before first use, separate the blades and wash them in hot, soapy
water or in the dishwasher. CAUTION: BLADES ARE SHARP.
HANDLE WITH CARE. Dry thoroughly.
2. The two blades must be attached before inserting into the
gearbox. Lock the blades together by inserting the rivet on one
blade into the keyhole of the other blade.
3. Holding the blades with the serrated edge facing down, insert
blades into the gearbox until you hear a click. The blades may not
line up evenly when properly inserted. CAUTION: THE BLADES
ARE VERY SHARP. BE CAREFUL WHEN HANDLING THEM.
A BLADE SHEATH IS INCLUDED TO PROTECT YOU AND
YOUR KNIFE BLADE.
SHARP SIDE
B. B.
9
BLUNT SIDE UP