Chopper/Grinder Attachment; Reversible Blade - Cuisinart CSB-300C Instruction And Recipe Booklet

Cordless smart stick hand blender and knife
Table of Contents

Advertisement

CHOPPER/GRINDER
1. Place the chopping/grinding blade assembly
into center of the chopping cup over metal
blade shaft.
2. Place your ingredients into the chopper cup.
Close cover, rotating clockwise to lock in
place.
3. Connect the power handle to the top of the
chopping cup cover until you hear a slight
click.

REVERSIBLE BLADE

The chopper/grinder attachment is equipped
with a reversible blade – sharp on one side and
blunt on the other. The blade is attached to a
plastic ring that slides over the plastic blade
shaft, so it can be easily turned over to select
the appropriate blade. To reverse the blade, see
detailed instructions below. Also see Frequent
Uses for Chopper/Grinder (page 15).
Assemble the parts.
1. Place the chopping cup on a flat, dry, stable surface.
2. The metal blade assembly shaft (A) is attached to the bottom of
the chopping cup. If not already in place, slide the fully assembled
blade assembly (B) over the top of the metal blade assembly shaft.
2a. Put together the blade assembly if not
assembled: Very carefully connect the blade
ring (C) to the plastic blade shaft (D). Line up
the blade ring opening with the plastic sheath.
There are notches (E) on opposite sides of the
interior of the ring. These fit over ridges on the
sides of the plastic blade sheath (G). Let the
blade ring slide to the bottom of the plastic
shaft. HOLD THE BLADE RING BY THE
CENTRAL HUB HOLDING RIBS (grips) (F) ONLY.
DO NOT TOUCH THE RAZOR-SHARP BLADES. Pick up the blade
ring by its hub holding ribs (grips) and turn it very slightly
clockwise. This locks it in place on the plastic blade sheath and
prevents it from sliding up during processing. Note these important
features of the blade ring. The blade ring can be placed over the
plastic blade shaft in two different ways:
If you hold it this way (A), you will see the
word "Sharp" on the blade. Assemble the
blade this side up to use the sharp edge.
If you hold it this way (B), you will see no
writing on the blade. Assemble the blade
this side up to use the blunt edge.
8
chopping
cup cover
E
G
B
A
C
F
D

Advertisement

Table of Contents
loading

Table of Contents