Service Information; Troubleshooting - KYMCO YUP 250 Manual

19
. SWITCHES/HORN/FUEL UNIT/THERMOSTATIC SWITCH
/TEMPERATURE GAUGE/INSTRUMENTS/LIGHTS

SERVICE INFORMATION

GENERAL INSTRUCTIONS
• After installation of each switch, a continuity check must be performed. A continuity check can
usually be made without removing the part from the motorcycle.
TESTING INSTRUMENT
Electric tester

TROUBLESHOOTING

Lights do not come on when ignition
switch is "ON"
• Burned bulb
• Faulty switch
• Poorly connected, broken or shorted wire
Fuel gauge pointer does not move or
register correctly
• Faulty fuel gauge
• Faulty fuel unit
• Poorly connected wire between fuel
gauge and fuel unit
• Fuse burned out
SPECIFICATIONS
Fuse
Headlight bulb
Turn signal light bulb
Stoplight/taillight
License plate light
Position light
Turn signal indicator light
www.PlanDeGraissage.org
Temperature gauge does not register
correctly
• Faulty temperature gauge
• Faulty thermosensor
• Broken or shorted wire between
temperature gauge and thermosensor
10A,15A,30A
12V 35W/35W
12V 10W
12V 21/5W
12V 5W
12V 5W
12V 3W
YUP 250
19-2