7
. CYLINDER/PISTON
CYLINDER REMOVAL
Remove the cylinder head. (
Remove the water hose from the cylinder.
Remove the cam chain guide.
Remove the cylinder.
Remove the cylinder gasket and dowel pins.
Clean any gasket material from the cylinder
surface.
PISTON REMOVAL
Remove the piston pin clip.
Press the piston pin out of the piston.
*
Place a clean shop towel in the crankcase
to keep the piston pin clip from falling
into the crankcase.
7-3
www.PlanDeGraissage.org
CHAPTER 6)
Shop Towel
YUP 250
Cylinder
Cam Chain Guide
Water Hose
Gasket
Dowel Pins
Piston Rings
Piston Pin
Piston