Directory; Save A Caller Id Log Entry To Allow - VTech IS7256-3 User Manual

• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a character.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to save. You hear
a confirmation tone.
NOTES
• The screen shows Number repeated if
the number is already in the directory.
You cannot save the same number
more than once.
• If you try to save a caller ID log entry
to the directory without a number, the
handset sounds an error tone.
• If the telephone number has more
than 15 digits, only the last 15 digits
appear in the caller ID log. However,
the telephone can still save all digits
(up to 24 digits) of that telephone
number from the caller ID log in the

directory.

• You might need to change how a caller
ID number is saved in the directory
if the entry does not appear in the
correct format. Caller ID numbers
might appear with an area code that is
not necessary for local calls, or without
a 1 that is necessary for long distance
calls.
Save a caller ID log entry to allow list
1. Search for the desired caller ID log
entry (See Review the caller ID
2. When the desired entry appears,
press MENU/SELECT.
3. Press q CID or p DIR to highlight To
Allow list on the handset, or Allow list
on the telephone base, and then press
MENU/SELECT. The screen displays
Enter number.
4. Use the dialing keys to edit the
number, if necessary.
• Press q CID or p DIR to move the
cursor to the left or right.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
5. Press MENU/SELECT. The handset
displays Enter name.
6. Use the dialing keys to edit the name.
• Press q CID or p DIR to move the
cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a character.
56
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
log).
characters.
• Press TONE to change the next
letter to upper or lower case.
7. Press MENU/SELECT to confirm. You
hear a confirmation tone.
Save a caller ID log entry to call block
list
1. Search for the desired caller ID log
Review the caller ID
entry (See
2. When the desired entry appears,
press MENU/SELECT.
3. Press q CID or p DIR to highlight
To Block list on the handset, or Block
list on the telephone base, and then
press MENU/SELECT. The screen
displays Enter number.
4. Use the dialing keys to edit the
number, if necessary.
• Press q CID or p DIR to move
the cursor to the left or right.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on the
telephone base to erase a digit.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all digits.
• Press and hold REDIAL/PAUSE
to insert a three-second dialing
pause (a P appears).
5. Press MENU/SELECT. The handset
displays Enter name.
6. Use the dialing keys to edit the name.
• Press q CID or p DIR to move
the cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on
the telephone base to erase a
character.
57
log).