Set Up Answering System Through Voice Guide (Before Use); Install; Mount The Telephone Base; Operating Range - VTech IS7256-3 User Manual

Set up Answering System through Voice
Guide (Before use)
After the Smart call blocker setting is
done or skipped, the telephone base
will then prompt if you want to set up the
answering system.
This feature assists you to do the basic
setup of the answering system. You can
follow the voice guide to record your
own announcement, set the number of
rings and the message alert tone.
1. Press MENU/SELECT to start the voice
guide for the answering system setup.
You hear the voice prompt " This voice
guide will assist you with the basic
setup of your answering system."
2. Setup your answering system by
inputting the designated numbers as
instructed in the voice guide.
NOTE
• To skip the answering system setup
via voice guide, press CANCEL on the
telephone base.
Alternate way to set up
This feature is an alternative way for you
to do the basic setup of the answering
system. You can follow the voice guide
to record your own announcement, set
the number of rings and the message
alert tone.
1. Press MENU/SELECT on the telephone
base in idle mode.
2. Press q CID or p DIR to scroll to
Answering sys, and then press
MENU/SELECT.
3. Press q CID or p DIR to scroll to Voice
guide, the press MENU/SELECT. You
hear the voice prompt "This voice
guide will assist you with the basic
setup of your answering system."
4. Set up your answering system by
inputting designated numbers as
instructed in the voice guide.
NOTES
• You can press CANCEL on the
telephone base to quit the voice
guide at any time.
• After a power outage, the telephone
base prompts you to set the date and
time, and Smart call blocker. After
these settings are done or skipped,
the telephone base then prompts
if you want to set up the answering
system via voice guide.
MENU/SELECT to start the setup.
20

Install

Mount the telephone base (optional)
a
B
b
B B
A
c
d
Press

Operating range

This cordless telephone operates with
the maximum power allowed by the
Federal Communications Commission
(FCC). Even so, this handset and
telephone base can communicate over
only a certain distance - which can vary
with the locations of the telephone
base and handset, the weather, and the
layout of your home or office.
When the handset is out of range, the
handset displays Out of range or no
pwr at base.
If there is a call while the handset is out of
range, it may not ring, or if it does ring,
B B
the call may not connect well when you
press HOME/FLASH. Move closer
to the telephone base, and then press
HOME/FLASH to answer the call. If
the handset moves out of range during
a telephone conversation, there may
be interference. To improve reception,
move closer to the telephone base.
21