Delete All Allow List Entries; Star Name List; Add A Star Name Entry; Review Star Name List - VTech IS7256-3 User Manual

Delete all allow list entries

1. Press CALL BLOCK on the handset or
telephone base to enter the call block
menu when the telephone is not in
use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p DIR to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p DIR to scroll to
Allow list, then press MENU/SELECT.
3. Press q CID or p DIR to highlight
Delete all, then press MENU/SELECT.
The handset shows Delete all?.
- OR -
Press q CID or p DIR to highlight
Delete all, then press MENU/SELECT.
The telephone base shows Delete all
in allow list?.
4. Press MENU/SELECT again to confirm.
The handset displays Deleting..., or
the telephone base displays Deleted.
There is a confirmation tone.

Star name list

There are many organizations like schools,
medical offices, and pharmacies that use
robocalls to communicate important
information to you. Robocall uses an
autodialer to deliver pre-recorded
messages. By entering the name of the
organizations into the star name list, it
ensures these calls will ring through
when you only know the caller names
but not their numbers.
If the first 15 characters of the incoming
caller ID's name match a name saved in
your star name list, the call will get through
and ring. The star name list stores up to
10 names.

Add a star name entry

1. Press CALL BLOCK on the handset or
telephone base to enter the call block
menu when the telephone is not in
use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p DIR to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p DIR to scroll to Star
name list, then press MENU/SELECT.
3. Press q CID or p DIR to scroll
to Add new entry, then press
MENU/SELECT.
4. When the screen displays Enter
name, use the dialing keys to enter
a name (up to 15 characters). Press
84
a key repeatedly until the desired
character appears. The first character
of every word is capitalized.
• Press q CID or p DIR to move the
cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE/VOICE on
the handset or X/DELETE on
the telephone base to erase a
character.
• Press and hold
MUTE/DELETE/VOICE on the
handset or X/DELETE on the
telephone base to erase all
characters.
• Press TONE to change the next
letter to upper or lower case.
5. Press MENU/SELECT to store your
star name entry. The display shows
Name repeated if the name is already
in the star name list. You cannot save
the same name twice.

Review star name list

1. Press CALL BLOCK on the handset or
telephone base to enter the call block
menu when the telephone is not in
use.
- OR -
Press MENU/SELECT to enter the
main menu when the handset is
not in use. Then, press q CID or
p DIR to scroll to Smart call blk. Press
MENU/SELECT.
2. Press q CID or p DIR to scroll to Star
name list, then press MENU/SELECT.
3. Press MENU/SELECT to choose
Review.
4. Press q CID or p DIR to browse
through the star name entries.
85