Screen Messages - VTech IS7256-3 User Manual

Screen messages

Blocked call
An incoming call is
blocked.
Calling HS X
The handset is calling
(For models another handset (for
with two intercom call
or more
handsets
only)
Ended You have just ended a
call.
Home The telephone is
screening... screening an incoming
home call.
HS X is Another handset is
calling calling.
(For models
with two
or more
handsets
only)
Intercom The handset is on an
intercom call.
Intercom to: You have started the
(For models intercom process,
with two or and need to enter the
more devices number of the device
only) you wish to call.
Line in use
An extension telephone
on the same line or one
of the handsets is in use.
List empty There are no directory
entries or call block list
entries.
Low battery The battery needs to be
charged.
Microphone Mute is off so the other
on
party can hear your
voice.
Muted
The microphone is off.
New There are new voicemail
voicemail messages from your
telephone service
provider.
No battery The handset in the
telephone base or
charger does not have
a battery properly
installed.
No line
There is no telephone
line connected.
No message There are no messages
in the answering
system.
Not available Someone else is already
using the phonebook,
caller ID log or
answering system.
Number The telephone number
repeated
you have entered is
already stored in the
phonebook.
Out of range The handset has lost
or no pwr at communication with the
base telephone base.
** Paging ** The telephone base is
paging all handsets.
Smart call blk The telephone is
screening... screening an incoming
call.
Speaker The handset
speakerphone is in use.
120
Voice guide After you install your
set Smart call
telephone or power
blk? returns following a
power outage, the
handset and telephone
base will prompt you
to set the date and
time. After the date and
time setting is done or
skipped, the telephone
base will then prompt
if you want to set up
the Smart call blocker
feature via voice guide.
To register The handset is not
HS... see registered to any
manual telephone base.
To screen The system is recording
call press a message. Press
[SELECT] MENU/SELECT to
screen a call on a
handset.
Unable to • Intercom failed.
call • You try to join a
call when there are
already four handsets
on that call.
• You try to make a call
when the handset is
out of range.
XX missed There are XX new calls
calls in the caller ID log.
XX new There are XX new
messages messages in the
answering system.
Put in The battery is very low.
charger
The handset should be
placed in the telephone
base or charger.
Quiet mode The quiet mode is
off turned off.
Quiet mode The quiet mode is
on turned on.
Rec mem low The answering system
has less than 3 minutes
to record.
Rec mem full The answering system
memory is full.
Ringer The ringer is muted
muted temporarily during an
incoming call.
Screen all You have selected the
Robocalls Screen robot profile
option in Smart call
blocker.
Screen all You have selected the
Unknown Screen Unknown profile
calls option in Smart call
blocker.
Screened call The Smart call
blocker feature of the
telephone has screened
a call and is putting the
call through to you.
Setting Ans The handset is playing
sys voice guide.
121