Table of Contents
Advertisement
Connecting Balanced/Unbalanced Stereo Audio Output
The following are the pinouts for connecting to balanced or unbalanced stereo audio sources:
Figure 4: Connecting to a Balanced
Connecting to VS-44UHDA via RS-232
You can connect to the
To connect to the
•
Connect the RS-232 rear panel port on the
9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5 need to be
connected) to the RS-232 9-pin D-sub port on your PC.
VS-44UHDA - Connecting the VS-44UHDA
Figure 3: Connecting to the VS-44UHDA Rear Panel
Stereo Audio Output
VS-44UHDA
VS-44UHDA
via RS-232:
Figure 5: Connecting an Unbalanced Stereo
Audio Acceptor to the Balanced Output
via an RS-232 connection
VS-44UHDA
Kramer Electronics Ltd.
using, for example, a PC.
unit via a
8
Advertisement
Table of Contents
