Protocol 3000 Commands
This section includes the following commands:
•
Common Commands
System Commands
•
•
Authentication Commands
•
EDID Handling Commands
•
Switch Commands
•
Switching Commands
•
Audio Commands
•
Communication Commands
Common Commands
Command
#
BUILD-DATE
FACTORY
HELP
MODEL?
PROT-VER?
RESET
SN?
VERSION?
IDV
LOCK-FP
NAME
NAME-RST
#
Functions
#
Set:
Get:
-
Description
Set:
Protocol handshaking
Get:
-
Response
~nn@SPOKCR LF
Notes
Validates the Protocol 3000 connection and gets the machine number.
Step-in master products use this command to identify the availability of a device.
K-Config Example
"#",0x0D
VS-44UHDA - Protocol 3000
on page
58
on page
63
on page
67
on page
69
on page
70
on page
74
on page
76
on page
78
Description
Protocol handshaking (system mandatory)
Get device build date (system mandatory)
Reset to factory default configuration
Get command list (system mandatory)
Get device model (system mandatory)
Get device protocol version (system mandatory)
Reset device (system mandatory)
Get device serial number (system mandatory)
Read device firmware version
Set visual indication from device
Lock/get front panel
Set/get machine (DNS) name
Reset machine name to factory default (DNS)
Permission
End User
-
Syntax
#CR
-
Transparency
Public
-
Kramer Electronics Ltd.
58