Connecting The Output To A Balanced/Unbalanced Stereo Audio Acceptor; Connecting To Vsm-4X4X Via Rs-232 - Kramer VSM-4x4X User Manual

Connecting the Output to a Balanced/Unbalanced
Stereo Audio Acceptor
The following are the pinouts for connecting the output to a balanced or unbalanced stereo
audio acceptor:
Figure 4: Connecting to a Balanced Stereo Audio
Acceptor

Connecting to VSM-4x4X via RS-232

You can connect to
VSM-4x4X features an RS-232 3-pin terminal block connector allowing the RS-232 to control
VSM-4x4X.
Connect the RS-232 terminal block on the rear panel of
follows:
From the RS-232 9-pin D-sub serial port connect:
•
Pin 2 to the TX pin on the
block
•
Pin 3 to the RX pin on the
block
•
Pin 5 to the G pin on the
VSM-4x4X – Connecting VSM-4x4X
VSM-4x4X via an RS-232 connection
VSM-4x4X RS-232 terminal
VSM-4x4X RS-232 terminal
VSM-4x4X RS-232 terminal block
Figure 5: Connecting to an Unbalanced Stereo Audio
Acceptor
using, for example, a PC.
18
VSM-4x4X
RS-232 Device
Kramer Electronics Ltd.
to a PC/controller, as
VSM-4x4X
8