10C. Assemble machine stand
1. Locking casters are used toward the front of the machine
2. Start all screws by hand before tightening
3. Each screw takes a flat washer and lock washer – Flat washer against
the stand.
4. Bolt two (2) lower cross members to stand side frames using
(8)- 8mm x 80 Hex screws
5. Bolt upper member to stand side frames using (8)- 8mm x 20 Hex
screws
6. Lay cloth tray across two lower cross members
7. Attach tray to cross members using (7)- Velcro straps
1
5
Gfp 300 Series
4
1. Left stand side frame
2. Upper cross member
3. Right stand side frame
4. Lower cross members
5. Locking caster
12
June 2023
2
3