Assemble Machine Stand - Gfp 563TH Operating Manual

9 D

Assemble machine stand

.
1. Remove stand from shipping box
2. Bolt cross members to stand side frame
3. Larger cross member goes in the center and takes the shorter bolts
4. Use a flat washer and lock washer – Flat washer contacts the stand.
5. Remove brake assembly, thread shaft through opening in stand
6. Bolt swing shaft assembly to stand with 6 bolts
7. Bolt cover to swing shaft assembly
8. Bolt machine alignment brackets to the outside of machine stand
Cover
Swing haft assembly
s
Gfp 563TH
Machine alignment bracket
12
December 2012
Machine alignment bracket