Gfp 300TH Series Operating Manual page 5

—Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
5. General Safeguards
• Keep hands, long hair, loose clothing, and articles such as neckties away from rollers to avoid
entanglement and entrapment. The rollers have pinch points that can trap body parts or
clothing and cause serious injury
• Do not use the machines for purposes other than lamination and mounting, otherwise
damages to the machine or accidents may occur
• Keep out of reach of children
• Keep flammable and wet objects away from the machine.
• Do not use flammable sprays or materials when cleaning the machine
• Do not leave the machine unattended during operations.
• Do not mount metal materials or other hard objects.
• Do not put burrs, sharp blade or rigid materials in between the two rubber rollers.
• Do not attempt to laminate items that exceed total recommended material thickness of the
unit.
• Do not place foreign object inside the machine.
• Do not cut adhesive films directly on the surface of the rollers to avoid damaging the rubber
coating.
• Shut down the machine after laminating to avoid misusing this machine by others.
• Shut down the power before moving the machine
• Note the locations of foot wheels while moving or operating this machine to avoid injuries
to your feet.
Disconnect from the power supply before repair or maintenance.
•
Disconnect from the power supply when the machine is not in use for a long time.
•
• When the machine lies idle for a long period of time, raise the top rubber roller to avoid the
distortion of the rubber surface.
• Perform only the routine maintenance procedures referred to in these instructions
• Do not leave excess adhesive build up on the rollers overnight
Gfp 300 Series
5
June 2023