Operating Conditions - Gfp 300TH Series Operating Manual

6. Operating Conditions

• Place machine on level surface
• Environment requirements：
Ambient temperature: 50⁰ F - 104⁰ F
Humidity：30%—80%；ideal humidity：55%
• Due to the static on film rolls, you should try to keep the environment clean.
• Provide enough space around machine to ensure the safe and effective operation.
The minimum area covered is 8 ft. x 10 ft.
• Do not directly cut the films on the surfaces of the rubber rollers to avoid damages
to the rollers.
• Do not put burrs, sharp knives or extra thick and hard materials in between the
rollers. Do not leave objects like tools, rulers, knives, etc. on the working panels
or the side cabinets to avoid their being rolled into the machine accidentally and
damaging the rollers.
• For repairs and replacements, please contact your local distributor. Unauthorized
repairs and dismantling will affect future maintenances of the machines.
• The machine can laminate continuously objects less than ½" thick.
For objects over ½" but less than 1" thick, use the pedal switch.
Warning: Do not keep the machines in direct sunshine or near it.
Do not keep the machine in dusty place or places with strong vibrations.
Gfp 300 Series
6
June 2023