Assemble Machine Stand; Set Machine On Stand - Gfp 563TH-4 Operating Manual

10D. Assemble machine stand
1. Remove stand components from the plastic shipping bags
2. Bolt cross members to stand side frame
3. Larger cross member goes in the center and takes the shorter bolts
4. Use a flat washer and lock washer – Flat washer contacts the stand.
10E. Set machine on stand
1. Lift the machine from shipping skid and onto machine the stand
Note: Locking castors go to the Front of the machine
Front
Locking castors
Gfp 563TH-4
Rear
13
Heavy! Handle with care!!
Warning: when moving the machine,
you should have your hands holding
on the upper supporting beam and the
rear supporting beam.
roller gap adjustment hand-wheel for
lifting!
Do not use