Assemble Machine Stand - Gfp 255 C Operating Manual

9. C. Assemble machine stand
1. Bolt cross members to stand side frames using (12)- 8mm x 80 Hex screws
2. Each screw takes a flat washer and lock washer – Flat washer against the
stand.
3. Start all screws by hand before tightening
4. Lay cloth tray across two bottom cross members
5. Attach tray to cross members using 7- Velcro straps
1. Lower Supply shaft
2. Supply mandrel/brake
3. Right stand side frame
4. Top cross member
5. Cloth tray
6. Bottom cross member
Gfp 255 C
7. Lower supply bracket
8. Left stand side frame
9. Cloth tray Velcro strap
10. Supply bracket screws (4) 8mm X 20
11. Cross member screws (12) 8mm X 80
12
June 2012