Table of Contents
Advertisement
8. Control Panel
1
2
3
1. POWER on indicator
2. Temperature adjustment
3. RUN/FOOT pedal switch
4. FORWARD/ REVERSE switch
Note:
1. The machine does not have continuous reverse. Reverse can only operate using the pedal switch
2. If the photo-electric eye stops the machine, move operation switch to "FOOT" then back to
"RUN" to continue operation.
C
3. The photo eyes are located on each side frame and shoot a beam across the front of the rollers on
top of the feed table.
4. Beginning with S/N 1905355TH069 and 1903363TH043, the POWER indicator will start
flashing whenever an E-Stop switch is engaged. Release the E-Stop to continue running.
Gfp 300 Series
4
5.
6. Speed adjustment
7. COLD/ HOT on switch
June 2023
HOT Lamination indicator
Flashing = warming up / Solid on = Ready
8
5
6
7
Advertisement
Table of Contents
