Assemble Machine Stand; Set Machine On Stand - Gfp 230 C Operating Manual

Gfp 230 C
June 2012
9. C. Assemble machine stand
1. Bolt cross members to stand legs using 8- 8mm x80 screws
2. Each screw takes a flat washer and lock washer – Flat washer against
the stand.
3. Start all screws by hand before tightening
9. D. Set machine on stand
1. Remove machine from the bottom supports of the shipping crate
2. Lift machine onto support stand
Heavy! Handle with care!!
Warning: when moving the machine, lift by side frames. Do not use roller gap adjustment hand-
wheel for lifting!
12