Removing Aiom Card; Removing Air Shroud, Riser And Riser Bracket - Supermicro SYS-221BT-HNC8R Disassembly Instructions Manual

7. Removing AIOM Card

1. Press the node holder, then hold the node and pull the node from the chassis
2. Press the release tab and loosen the thumbscrew on the AIOM card
3.
Grasp the release tab and the thumbscrew and pull the AIOM out of the node tray
No. Description
7.1 Node
7.2 AIOM Card
8. Removing the Air shroud, Riser, and the Riser Bracket
1. Lift the air shroud out of the chassis by hand
2. Remove screws each from the riser card bracket
3. Take the riser card and bracket away from the chassis
No. Description
8.1 Air shroud
8.2 Riser Card
8.3 Riser Bracket
7.1
7.2
8.1
12
8.2
8.3