Mirror - ZyXEL Communications ES-2724 User Manual

Syntax:
bandwidth-limit
bandwidth-limit pir <Kbps>
bandwidth-limit cir <Kbps>
bandwidth-limit egress <Kbps>
where
pir <Kbps>
cir <Kbps>
egress <Kbps>
An example is shown next.
• Enable port one for configuration.
• Set the outgoing traffic bandwidth limit to 5000Kbps.
• Set the guaranteed bandwidth allowed for incoming traffic to 4000Kbps.
• Set the maximum bandwidth allowed for incoming traffic to 8000Kbps.
sysname(config)# interface port-channel 1
sysname(config-interface)# bandwidth-limit egress 5000
sysname(config-interface)# bandwidth-limit cir 4000
sysname(config-interface)# bandwidth-limit pir 8000

42.2.5 mirror

The
mirror
Syntax:
mirror
mirror dir <ingress|egress|both>
where
dir
<ingress|egress|both>
An example is shown next.
• Enable port mirroring.
• Enable the monitor port 3.
Chapter 42 Interface Commands
= Sets the maximum bandwidth allowed for incoming traffic.
= Sets the guaranteed bandwidth allowed for incoming traffic.
= Sets the maximum bandwidth allowed for outgoing traffic
(egress) on the switch.
command enables port mirroring on the interface.
= Enables port mirroring for incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from one or all ports to another
or all ports for external analysis.
ES-2724 User's Guide
291