Member Config - ZyXEL Communications Dimension GS-2024 User Manual

GS-2024 User's Guide
Table 59 Command Summary: Enable Mode (continued)
COMMAND
time
garp
loginPrecedence
logging
ssh
https
multi-login
mac-aging-time
cluster
igmp-filtering
profile
igmp-snooping
multicast
mvr
igmp-flush
mac-flush
<port-num>
erase running-config
baudrate <1|2|3|4|5>
184
DESCRIPTION
Displays current system time and date.
Displays GARP information.
Displays login precedence settings.
Displays system logs.
Displays general SSH settings.
Displays known SSH hosts information.
known-hosts
key Displays internal SSH public and private
key information.
<rsa1|rsa|dsa>
Displays current SSH session(s).
session
Displays the HTTPS information.
session Displays current HTTPS session(s).
Displays the HTTPS certificates.
certificate
Displays the HTTPS key.
key <rsa|dsa>
timeout Displays the HTTPS session timeout.
Displays multi-login information
Displays MAC learning aging time.
Displays cluster management status.
Displays cluster candidate information.
candidates
Displays the MAC address of the cluster
member
member(s).
Displays the status of the cluster
member mac <mac-
member(s).
addr>
Displays the configuration of the cluster

member config

member(s).
Displays IGMP filter profile settings.
Displays IGMP snooping settings.
Displays multicast settings.
DIsplays all MVR (Multicast VLAN
Registration) settings.
DIsplays specified MVR information.
<vlan-id>
Removes all IGMP information.
Clears the MAC address table.
Removes all learned MAC address on the
specified port(s).
Resets to the factory default settings.
Changes the console port speed. Choices
are 1 (9600), 2 (19200), 3(38400), 4
(57600) and 5 (115200).
Chapter 27 Introducing the Commands