Preparing Vehicle For High Temperatures Or Slow Riding - Husqvarna 250 XC TPI 2021 Owner's Manual

7.8

Preparing vehicle for high temperatures or slow riding

–
Mount the steel sprocket.
–
Clean motorcycle. (
–
Straighten the bent radiator fins carefully.
600868-01
–
Check the radiator cap.
Value on the radiator cap
» If the indicated value does not correspond to the setpoint
value:
M01129-01
–
Change the radiator cap.
–
Adjust the secondary drive to the road conditions.
Info
The engine oil heats up quickly when the clutch is
operated frequently due to an excessively high sec-
ondary ratio.
–
Clean the chain.
Chain cleaner (
600868-01
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
–
Check the coolant level. (
PREPARING FOR USE 7
p. 123)
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
–
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
p. 140)
p. 103)
25