Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
78
–
Now inject the liquid into the system until it emerges from the
6
drill hole
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Remove the bleeding syringe. Mount and tighten screws
bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
V01668-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
Info
Clean up overflowed or spilled brake fluid immediately
with water.
of the master cylinder without bubbles.
4 mm (0.16 in)
Advertisement
Table of Contents
