Enter Reference Weight (Percentage Weighing); Confirm / Simulation "Press Print-Key; Start Internal Adjustment; Disable Automatic Internal Adjustment - KERN AEJ 100-4DM Operating Manual

29.6.19 Enter reference weight (percentage weighing)

˽
Command: RM XXXXX CR LF
Possible replies:
˽
RM OK CR LF
˽
RM I CR LF
ES CR LF

29.6.20 Confirm / simulation "Press PRINT-key"

Command: SS CR LF
Command SS CR LF is used to save the weighing result automatically to the
database and if an optional printer is connected to print out the result.

29.6.21 Start internal adjustment

Command: IC CR LF
Possible replies:
˽
IC A CR LF
˽
IC D CR LF
˽
IC E CR LF
˽
IC I CR LF

29.6.22 Disable automatic internal adjustment

Command: IC1 CR LF
Possible replies:
˽
IC1 OK CR LF
˽
IC1 I CR LF
˽
IC1 E CR LF
166
Command executed
Command valid but cannot be executed at the moment (e. g.
incorrect operating mode)
Syntax error (incorrect weight format)
Adjustment running
Adjustment finished
Command valid but cannot be finished at the moment (e. g .
range or time limit for stability display exceeded)
Command valid but cannot be executed at the moment
Command executed
Command valid but cannot be executed at the moment (Not
available in weighing balances with type approval)
Command valid but not available at the moment
AEJ-C/AES-C/PLJ-C-BA-e-1730