Piece Counting; Determination Of The Reference Weight By Weighing - KERN CIB Operating Manual

7 Piece counting

With piece counting you can either count parts into a container or remove parts from
a container. To count a greater number of parts, the average weight per part has to
be determined with a small quantity (reference quantity). The larger the reference
quantity, the higher the counting exactness. High reference must be selected for
small parts or parts with considerably different sizes.

7.1 Determination of the reference weight by weighing

Set balance to zero and tare, as
required. Place a known number of
single parts on the balance as reference
weight. If the balance is stable, enter
the quantity of the placed parts on the
numeric keyboard. The input is shown
in the reference weight window; press
, the total weight of the parts, the
piece weight and the number of parts
are displayed.
Unload the weighing plate and place the
parts to be counted on the weighing
plate.
The weight of all parts, the piece weight
and the number of parts are displayed.
CIB-BA-e-2010
(example)
19