KERN AEJ 100-4DM Operating Manual page 133

2. Measuring sequence for test volume V2:

Follow the same sequence of operations for the second measuring sequence
but apply test volume <V2>wit
3. Measuring sequence for test volume V3:

Follow the same sequence of operations for the third measuring sequence but
apply test volume <V3>
 After pressing the PRINT-key and the display of the systematic measurement
deviation [E ] / default deviation [S
s
interface if an optional printer is connected (See sample printout below).

To start a new pipette test, press the F-key.

Return to weighing mode:
AEJ-C/AES-C/PLJ-C-BA-e-1730
] printing of log will take place via RS232
r
133