Parts Counting; Determination Of The Reference Weight By Weighing - KERN CXP 30 K2 Operating Instruction

Table of Contents

Available languages

8 Parts counting

With parts counting you can either count parts into a container or remove parts from

a container. To count a greater number of parts the average weight per part has to

be determined with a small quantity (reference quantity). The larger the reference

quantity, the higher the counting exactness. High reference must be selected for

small parts or parts with considerably different sizes.

Set balance to zero and tare, as required.

Place a known number of parts on the balance as reference weight

If the "Weight" display is stable, enter the number of parts via number keys.

While the "number of pieces" display is flashing (3 sec) confirm by pressing the

Dead stop control is carried out and the calculated reference weight appears on the

Now you can place the parts to be counted onto the weighing plate.

All quantity parameters of your goods to be weighed are displayed:

CXB/CXP-BA-e-0812

Reference weight

Table of Contents