Drum Refresh 1; Drum Refresh 2 - Kyocera 7056i Operation Manual

Troubleshooting > Adjustment/Maintenance

Drum Refresh 1

Remove image blur from the printout.
NOTE
Drum Refresh 1 cannot be performed while printing. Execute Drum Refresh 1 after the printing is done.
1
2

Drum Refresh 2

Remove white dots from the printout.
NOTE
Drum Refresh 2 cannot be performed while printing. Execute Drum Refresh 2 after the printing is done.
1
2
3
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > "Drum Refresh 1" [Next]
Perform the drum refresh.
Select [Start]. "Drum Refresh 1" begins.
Load paper.
Load Ledger or A3 size paper into the Multipurpose tray.
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > "Drum Refresh 2" [Next]
Perform the drum refresh.
Select [Start]. "Drum Refresh 2" begins.
NOTE
When you run [Drum Refresh 2], the machine makes a vibrating sound for about
45 seconds until drum refreshing is completed. The toner soiling on the ejected paper is
normal and does not indicate a fault.
10-41