Kyocera 7056i Operation Manual page 316

Using Various Functions > Functions
Item
Off
Border Erase Border
Sheet
Back Page
Border Erase Border
Book
Gutter
Back Page
Individual Top
Border Erase
Bottom
Left
Right
Original
Orientation
Back Page
*1 The input units can be changed in System Menu.
Measurement (page 8-15)
Value
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00" to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not
Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00" to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not
Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Top Edge on Top, Top Edge on
Left, Auto
Same as Front Page, Do Not
Erase
6-42
Description
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Set the border erase width.
Set the value by selecting [+] or [-].
Select [# Keys] to use the numeric keys
for entry.
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
Then select [OK].
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
*1
*1
*1