Configuring Nfc - Kyocera 7056i Operation Manual

Installing and Setting up the Machine > Network Setup

Configuring NFC

NFC (Near Field Communication) is the internal standard for near field communication in which the data communication
distance is limited to approximately 10 cm. Establishing data communication simply requires you to show the handheld
device supporting NFC to this machine.
The configuration methods are as follows:
Configuring Connections on the Web Page
You can set NFC from the Embedded Web Server RX.
Embedded Web Server RX User Guide
Configuring the Connection from the Operation Panel on This Machine
Configure the NFC from the System Menu.
NFC (page 8-66)
This section presents an example for configuring the NFC from the System Menu.
1
2
Display the screen.
[System Menu/Counter] key > [System/Network] > "NFC" [Change]
Configure the settings.
[On] > [OK]
2-40