Kyocera 7056i Operation Manual page 605

Appendix > Optional Equipment
(8) Banner Guide(A) "Banner Tray"
This tray enables continuous feeding of banner paper. Up to 10 sheets of banner paper can be loaded. To attach the tray
and load paper, refer to the following:
Using the Banner Tray (Option) (page 4-12)
(9) Copy tray(D) "Copy tray"
These are attached to the left side of the machine when the optional 4,000-Sheet Finisher is not used. There are two
trays: the Upper Left Tray and the Lower Left Tray.
(10) NK-7100, NK-7110 "Optional Numeric Keypad"
The numeric keypad is added to the operation panel. If the optional numeric keypad is installed, numeric keys do not
appear on the touch panel.
(11) DT-730 (B) "Document Table"
Place original or other documents when using the machine.
(12) Keyboard Holder 10 "Keyboard Holder"
A USB keyboard connected to the machine can be placed here.
(13) FAX System 12 "FAX Kit"
By installing the FAX kit, fax send/receive is enabled. Also, it is possible to use it as a network fax, by using it with a
computer. When two FAX kits are installed, the units can be connected to two different telephone lines which will enable
quicker message transmission to a number of recipients. If one of the lines is dedicated to receiving, the busy line time
can be reduced.
FAX Operation Guide
(14) IB-50 "Network Interface Kit"
The Network Interface Kit provides a high-speed connection for the Gigabit-per-second interface. This kit supports
traditional protocols such as AppleTalk, Netware and so on.
It also supports only the least functions in the standard utilities.
IB-50 User's Manual
(15) IB-51 "Wireless Network Interface Kit"
This is a wireless LAN interface card which supports the wireless LAN specifications IEEE802.11n (Max 300 Mbps) and
11 g/b. This supports traditional protocols such as AppleTalk, Netware and so on.
It also supports only the least functions in the standard utilities.
The IB-51 Setup utility supports Windows OS and Mac OS X.
IB-51 User's Manual
(16) IB-35 "Wireless Network Interface Kit"
This is a wireless LAN interface card which supports the wireless LAN specifications IEEE802.11n (max. 65 Mbps) and
IEEE802.11 g/b. In addition, network printing is possible without using the wireless LAN router because Wi-Fi Direct is
supported.
11-5