Mixed Size Originals - Kyocera 7056i Operation Manual

Using Various Functions > Functions
*5 For instructions on how to specify the custom paper types 1 to 8, refer to the following:
Media Type Setting (page 8-15)
To print on preprinted or prepunched paper or on letterhead, refer to the following:
Special Paper Action (page 8-14)
IMPORTANT
When paper size and the media type for MP tray is specified, [Paper Settings] is selected. Note that if [MP
Tray] is pressed at this point, the settings will be canceled.
NOTE
• You can conveniently select in advance the size and type of paper that will be used often and set them as default.
MP Tray Setting (page 8-8)
• If the specified size of paper is not loaded in the paper source cassette or multipurpose tray, a confirmation screen
appears. When [Auto] is selected and the same size of paper as the detected original size is not loaded, a paper
confirmation screen appears. Load the required paper in the multipurpose tray and press [Continue] to start
copying.

Mixed Size Originals

Org./Paper/
Copy
Finishing
Scan the documents of different sizes that are set in the document processor all at once.
This function cannot be used if platen is used. Different Width is not displayed in inch models.
Copying
Metric Models
Item
Off
Mixed Size Original Width
Copies
Same Size Original Width
Copies
Top Page
Direction
Inch Models
Item
Off
Mixed Size Copies
Same Size Top Page
Copies Direction
Org./Sending
Custom
Send
Data Format Box
Same Width, Different Width
Same Width, Different Width
Long Edge Left, Short Edge Left
—
Long Edge Left, Short Edge Left
Functions
USB
Memory
Value
Select options for the width of set original.
Select options for the width of set original.
Select the original orientation of the first
page.
Value
Originals are detected individually for size
and copied to the same size paper as
originals.
Select the original orientation of the first
page.
6-20
Functions
Description
Description