Kyocera 7056i Operation Manual page 189

Printing from PC > Printing from PC
Using the Banner Tray (Option)
When the banner tray (option) is used, up to 10 sheets of banner paper can be fed continuously.
The operation procedure for setting the banner paper by using the printer driver is the same as that of using the
multipurpose tray.
Using the Multipurpose Tray (page 4-9)
NOTE
The paper length supported in banner tray is 900 mm to 1,220 mm (35.44" to 48").
1
2
Open the multipurpose tray.
Open the multipurpose tray until it stops.
Do not extend the support tray section of the multipurpose tray.
Attach the banner tray.
1
Release the paper width guide lock on the banner tray and open to the maximum width.
4-12