Resetting The Lcm - Spectra Logic T-Series Spectra T120 Release Note

User Guide Updates
7. Scroll down and select Restore MLM Database from USB. The screen refreshes to
show the details for the utility (Figure 34).
Figure 34 The Restore MLM Database from USB utility.
8. Use the drop-down list to select the file name of the backup you want to use for the
restore.
9. Select Run Utility.
After a brief delay, the Utility Results screen displays, showing that the database
was restored.

Resetting the LCM

To reset the LCM, insert the tip of a toothpick or other similar non-conductive object
into the hole on the back of the LCM (see Figure 35) to press the reset button.
Caution
Note:
Resetting the LCM also resets the motion control for the transporter. Any
move requests to the transporter will fail until the LCM completes its
initialization.
Figure 35 The LCM reset.
82
Do not use a metallic object to reset the LCM. You may
inadvertently cause an electrical short inside the module.
LCM reset