Displaying Network Information - Spectra Logic Spectra nTier700 Installation Manual
Virtual tape library appliance
Hide thumbs
Also See for Spectra nTier700:
- Release note (14 pages) ,
- Supplementary manual (11 pages) ,
- Read this first (2 pages)
Table of Contents
Advertisement
3. Select the time range you want to view from the View pull-down menu:
Last 2.5 days (30-minute intervals)
Last 5 days (1-hour intervals)
Last 10 days (10-hour intervals)
Last 30 days (6-hour intervals)
4. Select the units of measure you want to use for the vertical axis (Average Power
Consumption) of the graph from the Units pull-down menu:
Watts
Watts/TB
Displaying Network Information
The Network page displays the network configuration information for the
nTier700 VTL Ethernet ports.
1. Log into the BlueScale web interface (see Accessing the BlueScale Web Interface on
page 48)
2. Select Configuration > Network to display the Network page.
Figure 4-11 The Network page.
3. Select the Local Area connection you want to view. See Configuring Additional
Network Connections on page 50 if you need to configure a new network
connection or modify an existing one.
Displaying Network Information
67
Advertisement
Table of Contents
