Spectra Logic Spectra nTier500 Install Manual
Archive and backup server front bezel
Hide thumbs
Also See for Spectra nTier500:
- User manual (121 pages) ,
- Release note (24 pages) ,
- Instructions manual (28 pages)
Related Manuals for Spectra Logic Spectra nTier500
Summary of Contents for Spectra Logic Spectra nTier500
- Page 1 Spectra nTier500 ® Archive and Backup Server Front Bezel Replacement Guide P.N. 90990014 Revision A...
- Page 2 In no event shall Spectra Logic be liable for any loss of profits, loss of business, loss of use or data, interruption of business, or for indirect, special, incidental, or consequential damages of any kind, even if Spectra Logic has been advised of the possibility of such damages arising from any defect or error.
-
Page 3: Table Of Contents
Install the New Bezel ......... . 5 Packaging a Component for Return to Spectra Logic ..... 6 Domestic RMA Returns. -
Page 4: Introduction
1. Insert a key into the lock on each side of the bezel. Turn both keys until they are in the vertical position to unlock the bezel, as shown in Figure 1. 2. Carefully pull the bezel straight out from the chassis to remove it. Spectra nTier500 Archive and Backup Server Bezel Replacement Guide Figure 1 Unlock the bezel. ®... -
Page 5: Install The New Bezel
Be careful not to bump or bend the PC card extending from the front of the chassis. Alignment tab Connector for bezel PC card PC card Figure 3 Attach the front bezel. Spectra nTier500 Archive and Backup Server Bezel Replacement Guide... -
Page 6: Packaging A Component For Return To Spectra Logic
4. Place foam over the top of the component to secure it in place. 5. Tape the box securely shut. 6. Proceed to one of the following for shipping instructions: • Domestic RMA Returns on page 7 • International Returns on page 7 Spectra nTier500 Archive and Backup Server Bezel Replacement Guide... -
Page 7: Domestic Rma Returns
Domestic RMA Returns Caution: You must package the component in the box provided by Spectra Logic, making sure to use all of the packing materials provided to prevent damage during shipment. Failure to properly package the component may result in damage to the component. -
Page 8: If You Need Assistance
Spectra Logic arranges for return shipment when a request is made to International Shipping (see the contact information below). 1. Fill out your portion of the International Shipping Instructions form, available on the Spectra Logic Web site. 2. Return the form to Spectra Logic in one of the following ways: E-mail: intlreturns@spectralogic.com...