Configure Network Connections And Settings; Configure Ethernet Ports - Spectra Logic BlackPearl User Manual

Chapter 6 - Additional Configuration Options
Topic
Edit an S3 Group
Delete a User or S3 Group
Configure Certificates
Manually Enter Activation Keys
C
ONFIGURE
Use the Network screen to edit the system name, configure Ethernet ports and DNS settings,
and to enter SMTP and NTP information.
Figure 83 The Network screen.

Configure Ethernet Ports

This section describes using the BlackPearl user interface to configure the IP addressing for
the Ethernet ports in the BlackPearl system. The system includes two 10 GigE ports on the
rear panel (see Figure 5 on
November 2020
N C
ETWORK
page 36). Optionally, a two-port 40 GigE card can be installed.
ONNECTIONS AND
User Guide-BlackPearl Converged Storage System
- 171 -

Configure Network Connections and Settings

page 209
page 210
page 210
page 211
S
ETTINGS