Introduction
These instructions describe replacing a data drive in the following Spectra
products:
Spectra nTier300 Virtual Tape Library (VTL) appliance (nTier300 VTL)
Spectra Tier500 Intelligent Secondary Storage appliance (nTier500)
Spectra nTier700 VTL appliance (nTier700 VTL)
Spectra Tier700 Intelligent Secondary Storage appliance (nTier700)
Except where noted, the data drive replacement instructions for the nTier300 VTL and
the nTier500 are identical (see Replacing an nTier300 VTL or nTier500 Data Drive on
page 6); the instructions for the nTier700 VTL and the nTier700 are also identical (see
Replacing an nTier700 or nTier700 VTL Data Drive on page 15).
Typographical Conventions
These release notes use the following conventions to highlight important information:
Note:
Read notes for additional information or suggestions about the current
topic.
Important
Caution
Warning
These release notes use an arrow (>) to describe a series of menu selections. For
example:
Select General > Overview.
— means —
Select General, then select Overview.
Read text marked by the "Important" icon for information that
will help you complete a procedure or avoid extra steps.
Read text marked by the "Caution" icon for information you
must know to avoid damaging the library, the tape drives, or
losing data.
Read text marked by the "Warning" icon for information you
must know to avoid personal injury.
German: Lesen Sie markierten Text durch die "Warnung"-
Symbol für die Informationen, die Sie kennen müssen, um
Personenschäden zu vermeiden.
5
nTier
®
Need help?
Do you have a question about the Spectra nTier300 and is the answer not in the manual?