Husqvarna FC 350 2020 Owner's Manual page 64

11 SERVICE WORK ON THE CHASSIS
62
(FC 350)
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
K01098-01
Remaining screws,
chassis
(FX 350)
–
Position the foot brake cylinder.
Push rod
Info
Ensure that the dust boot is correctly seated.
–
Mount and tighten screws
Guideline
V01351-10
Remaining screws,
chassis
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
Guideline
Nut, linkage lever on
angle lever
Info
Pay attention to flat area
S01927-10
–
Mount and tighten screw
Guideline
Screw, bottom
shock absorber
Info
Raise the wheel slightly to be able to mount the screw
more easily.
–
Attach frame protector in area
–
Mount and tighten screws
Guideline
Screw, frame pro-
tector
–
Mount the new cable ties.
V01369-11
4
engages in the foot brake cylinder.
5
.
M6 10 Nm (7.4 lbf ft)
4
engages in the foot brake cylinder.
5
.
M6 10 Nm (7.4 lbf ft)
6
.
M14x1.5 60 Nm (44.3 lbf ft)
B
.
7
.
M10 60 Nm (44.3 lbf ft)
Loctite
C
and position.
8
with the washers.
M5 3 Nm (2.2 lbf ft)
®
2701™