Table of Contents
Advertisement
SERVICE WORK ON THE CHASSIS 11
(FX 350)
–
Fill bleeding syringe
fluid.
Syringe (50329050000)
Brake fluid DOT 4 / DOT 5.1 (
–
On the clutch slave cylinder, remove the protection cap
and mount bleeding syringe
piece at the bleeder screw
V01404-10
–
Only loosen bleeder screw
der to the point where filling is possible.
Info
Clean up overflowed or spilled brake fluid immedi-
ately with water.
Avoid contact between brake fluid and painted
parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
–
Now inject the liquid into the system until it emerges from drill
6
hole
of the master cylinder without bubbles.
–
Now and then, extract fluid from the master cylinder reservoir
to prevent overflow.
–
Tighten the bleeder screw and remove the bleeding syringe
with the hose. Mount the protection cap.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container
V01547-10
rim
–
Position the cover with the membrane. Mount and tighten the
screws.
4
with the appropriate hydraulic
p. 146)
4
with appropriate hose
5
.
5
on the clutch slave cylin-
4 mm (0.16 in)
83
Advertisement
Table of Contents
