Husqvarna FC 350 2020 Owner's Manual page 89

Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
V01535-10
H02360-10
Preparatory work
–
Check the front brake linings. (
Main work
(FC 350)
–
Move the brake reservoir mounted on the handlebar to a
horizontal position.
–
1
Remove screws .
–
2
Take off cover with membrane
–
Add brake fluid to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten
the screws.
Info
Clean up overflowed or spilled brake fluid immedi-
ately with water.
(FX 350)
–
Move the brake reservoir mounted on the handlebar to a
horizontal position.
–
1
Remove screws .
–
2
Take off cover with membrane
–
Add brake fluid to level
Guideline
A
Level (brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
Position the cover with the membrane. Mount and tighten
the screws.
Info
Clean up overflowed or spilled brake fluid immedi-
ately with water.
BRAKE SYSTEM 12
p. 88)
3
.
A
.
5 mm (0.2 in)
p. 146)
3
.
A
.
5 mm (0.2 in)
p. 146)
87