Husqvarna TC 65 2020 Owner's Manual page 47

SERVICE WORK ON THE CHASSIS 11
–
Position the upper triple clamp with the handlebar.
–
4
Mount nut
Guideline
Nut, steering head
S01488-10
–
Position the fork legs.
Bleeder screws
Info
The upper milled groove in the fork leg must be flush
with the upper edge of the upper triple clamp.
F02179-11
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S01489-10
–
4
Tighten nut
Guideline
Nut, steering head
F02247-10
–
Mount and tighten screw
Guideline
Screw, steering stem M8
–
Position fuel tank breather
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
F02248-10
, but do not tighten it yet.
M20x1.5 10 Nm (7.4 lbf ft)
5
are positioned toward the rear.
6
.
M8 15 Nm (11.1 lbf ft)
.
M20x1.5 10 Nm (7.4 lbf ft)
7
.
20 Nm (14.8 lbf ft)
8
in the steering stem.
45