Removing Cpu (Model With Water-Cooling Kit) - NEC Bull NovaScale R620 User Manual

14.
Fix the water-cooling kit on the motherboard with four screws of the pump area.
IMPORTANT:
Place the protuberances of the water-cooling kit in the hollows of the module.
15.
Mount the cooling fan unit, insert the cable, and secure the
cooling fan unit with two screws.
IMPORTANT:
When mounting the water-cooling fan unit, avoid
catching or damaging the tube of the water cooling kit.
16.
Install the CPU/IO module referring to page 8-13.
17.
Connect the power cord.
18.
Turn on the power by pressing the POWER switch.
19.
Verify that POST displays no error message. If an error message is displayed, write it down and check it in the error
message list on page 7-4.

Removing CPU (Model with Water-cooling Kit)

Removal of a water-cooling kit is the reverse of installation.
NovaScale R620 User Guide
Protuberances
Hollows
Pump
Screw of the pump
Water-cooling kit
8-26