NEC Bull NovaScale R620 User Manual page 123

The following describes each option on the Exit menu:
Exit Saving Changes
Select this option to save the current configuration data into the
CMOS (non-volatile memory) and exit the SETUP utility.
Select "Exit Saving Changes" to display the right screen. Select
"Yes" to save the current configuration data into the CMOS
(non-volatile memory) and exit the SETUP utility. The server
will automatically restart the system.
Exit Discarding Changes
Select this option to exit the SETUP utility without saving the
current configuration data into the CMOS (non-volatile
memory).
If you select "Yes" here, the "SETUP Warning" dialogue box
appears.
If you select "No" in the "SETUP Warning" dialogue box, you
can exit
SETUP without saving the changes you have made.
If you select "Yes" in the dialogue box, you can exit SETUP
with the changes you have made saved in CMOS. The server
reboots automatically.
Load Setup Defaults
Select this option if you want to reset all values in SETUP to
default (factory-set values). When you select Load Setup
Defaults, the dialogue box as shown on the right appears.
If you select "Yes" in the dialogue box, default values are
restored. If you select "No", you will see the Exit menu screen.
IMPORTANT:
The default value slightly differs from the factory-set value.
Check all setting values before restoring the default value.
Discard Changes
Select this option if you want to restore previous values before
saving values in CMOS. When you select "Discard Changes", you
will see the dialogue box as shown on the right.
If you select "Yes" in the dialogue box, changes you have made
are discarded and previous settings are restored.
NovaScale R620 User Guide
4-24