NEC Bull NovaScale R620 User Manual page 251

Sound a beep when the update failed: If the BIOS update fails, the tool sounds beeps.
Notes:
- The dialog box on page 5-75 may also be displayed when the system is temporarily degraded. In such a case,
it is automatically closed when the system status returns to the duplex state and the FT STATUS LED lights
green.
-
If you have mistakenly closed the dialog box on page 5-75, run the following program:
C:\ Program Files\NEC\HAS_SW\HASFTSTS\HASFTSTU.EXE
- When the dialog box on page 5-75 is still displayed after the FT STATUS LED lights green, press the Alt +
F4 keys together to close it.
-
The firmware update status dialog is temporarily closed by the changes on the user logon status. If the
automatic update of the firmware is started without a user logging on and the progress window is displayed,
the window closes when you try to log on during the operation. After that when the firmware update process
finishes, the progress window is displayed again. Also, if a user logs off while updating the firmware, the
progress screen closes temporarily in the same way and is displayed again when the firmware update is
completed.
NovaScale R620 User Guide
5-77